Lee Lead Hardness Tester

Lee Lead Hardness Tester - The method is described here. An ingot from a source that described it as nearly linotype i read about a 12. The lee seems to be more repeatable. Applied force, ball (indenter) diameter, cave (impression) diameter and the hardness. I prefer to cast test bullets in the larger calibers (.44 or.45) with a wide flat nose profile to insure the best results, but it`s usefulness is a matter of. Participants did blind tests of sample bullets all cast in the same lot. Lee bh tester uses standard hardness test method that was originally proposed by johan august brinell. I have the luxury of a borrowed early saeco lead hardness tester. When in a good rythem, they come out fairly simular though. The saeco is a little different.

An ingot from a source that described it as nearly linotype i read about a 12. The lee seems to be more repeatable. More often than not i have slowly learned to read the pot with what materials i put in and go from there. The method is described here. Using a lee hardness tester what i've found is that lead hardness is all over the place. My bullet alloy needn't be accurate to 1 bhn of a laboratory certified as it just needs to get me a rough idea how hard my alloy is. My lee tester is not laboratory accurate and it isn't necessary. 3,524,343) it is machined steel and not the current version, made of some sort of gold colored alloy. One of those articles is a comparative test of most of the common lead hardness testers. On my lee tester the ball mikes to.156 (3.965mm).

Lee Lead Hardness Testing Kit 90924 Delfiero S.r.l.

I was one of the lbt testers using a 30 year old tool that agreed well with the standard results. Using a lee hardness tester what i've found is that lead hardness is all over the place. Here are some things i recently tried in regards to my lee microscope stand. 3,524,343) it is machined steel and not the current.

Lee Precision Lead Hardness Testing Kit Impact Guns

Participants did blind tests of sample bullets all cast in the same lot. Way too many variables to get certified hardness results from a mass produced tool that one eyes a dent in a sample. The saeco is a little different. More often than not i have slowly learned to read the pot with what materials i put in and.

Lee Lead Hardness Testing Kit Reloading Tools Gun Mart

More often than not i have slowly learned to read the pot with what materials i put in and go from there. I have the luxury of a borrowed early saeco lead hardness tester. Most of my lead has been scrounged keel weights and range scrap and a smattering of wheel. I have a new lee hardness tester and i'm.

Hunting Sports & Outdoors Gun Accessories Lee Precision Lead Hardness

The lee here as well, as it is not used on a regular basis it suits my needs to validate hardness of batches of smelted lead when i think about it. Participants did blind tests of sample bullets all cast in the same lot. One of those articles is a comparative test of most of the common lead hardness testers..

Lee Lead Hardness Test Kit Microscope Stand Very Helpful Tool

Way too many variables to get certified hardness results from a mass produced tool that one eyes a dent in a sample. I don't have any known hardness alloy to use as a baseline. Most of my lead has been scrounged keel weights and range scrap and a smattering of wheel. Well, two weeks ago, i finally started my alloy.

Lee Precision Reloading Lead Hardness Test Kit 90924

When in a good rythem, they come out fairly simular though. An ingot from a source that described it as nearly linotype i read about a 12. More often than not i have slowly learned to read the pot with what materials i put in and go from there. Participants did blind tests of sample bullets all cast in the.

Lee Precision Lead Hardness Testing Kit

Lee bh tester uses standard hardness test method that was originally proposed by johan august brinell. It is a little harder to use, though. On my lee tester the ball mikes to.156 (3.965mm). The method is described here. One of those articles is a comparative test of most of the common lead hardness testers.

1. Lead Alloy Hardness Measuring with the Lee Hardness Tester YouTube

My bullet alloy needn't be accurate to 1 bhn of a laboratory certified as it just needs to get me a rough idea how hard my alloy is. I don't have any known hardness alloy to use as a baseline. I prefer to cast test bullets in the larger calibers (.44 or.45) with a wide flat nose profile to insure.

Lee Lead Hardness Test Kit 90924

I have a lee lead hardness tester and find it difficult to use, has anybody come up with a mounting plate to make it easier to operate, looking for some help! Most of my lead has been scrounged keel weights and range scrap and a smattering of wheel. The saeco and lee seem to match pretty well when i use.

Lee Lead Hardness Testing Kit Lee Precision

Here are some things i recently tried in regards to my lee microscope stand. I prefer to cast test bullets in the larger calibers (.44 or.45) with a wide flat nose profile to insure the best results, but it`s usefulness is a matter of. Last fall, i bought a lee hardness tester for some testing of different alloys and how.

Well, Two Weeks Ago, I Finally Started My Alloy Testing, Which Includes Lots Of Hardness Testing.

I tested ingots, not bullets; I have a new lee hardness tester and i'm not sure of the answers i'm getting with it. What i found with some alloys is that ingots would not be the same hardness as a cast boolit. Using a lee hardness tester what i've found is that lead hardness is all over the place.

I Have The Luxury Of A Borrowed Early Saeco Lead Hardness Tester.

I was one of the lbt testers using a 30 year old tool that agreed well with the standard results. I prefer to cast test bullets in the larger calibers (.44 or.45) with a wide flat nose profile to insure the best results, but it`s usefulness is a matter of. The method is described here. The lee here as well, as it is not used on a regular basis it suits my needs to validate hardness of batches of smelted lead when i think about it.

It Is A Little Harder To Use, Though.

On my lee tester the ball mikes to.156 (3.965mm). The saeco is a little different. I don't have any known hardness alloy to use as a baseline. Here are some things i recently tried in regards to my lee microscope stand.

The Lee Matches The Method And Is Similar To The Large Size Industrial Hardness Testers I Used To Have Access To In A Past Job.

My bullet alloy needn't be accurate to 1 bhn of a laboratory certified as it just needs to get me a rough idea how hard my alloy is. Depending on how hot the mold or alloy was can even make it vary. Formula for the metod connects 4 variables: The lee seems to be more repeatable.